🔌 Brand Independent

Supported Devices

Integration with Schneider, ABB, Siemens, Zenner, Socomec and hundreds more brands/models via Modbus TCP/RTU, M-Bus TCP, BACnet/IP, SNMP, OCPP and LoRaWAN.

Desteklenen enerji analizörü ve cihazlar

Which Devices Does 6S Teknoloji Support?

6S Teknoloji is brand independent: it reads any device speaking Modbus TCP/RTU, M-Bus TCP, BACnet/IP, SNMP, OCPP or LoRaWAN — energy analyzers, transformer meters, water and heat meters, UPS units, genset controllers, chillers, VRV/VRF indoor and outdoor units, EV charging stations and wireless room sensors. Where a register template exists, a new model is defined in minutes; where it does not, the device map is derived and added to the template library. No device replacement required.

Supported Protocols

ProtocolUse CaseConnectionExample Devices
Modbus TCPEnergy analyzers, transformer metersEthernet / RJ-45Schneider PM5xxx, Siemens SENTRON, ABB B-serisi
Modbus RTULegacy meters, RS-485 panelsRS-485 / USB-RS485 converterEastron SDM, Carlo Gavazzi, Chint DDSU
M-Bus TCPWater meters, heat metersEthernet M-Bus GatewayZenner MBUS, Kamstrup, Sensus
DSE GensetGenerator control unitsEthernet / ModbusDSE 7xxx/8xxx serisi, ComAp InteliGen
SNMPUPS systemsEthernetAPC Smart-UPS, Eaton 9xxx, Huawei UPS
BACnet/IPVRV/VRF indoor and outdoor units, BMS pointsEthernet / BACnet gatewayGree GMV and other BACnet-capable VRF gateways, BMS controllers
OCPP 1.6-J / 2.0.1EV charging stationsEthernet / 4G (WebSocket)OCPP-compliant AC/DC charging stations
LoRaWANCO₂/indoor air quality, window contacts, room controllersLoRaWAN gatewayBattery-powered wireless room sensors

Device Categories

⚡

Transformer & Energy Analyzer

Power transformers, compensation panels, energy analyzers. kW, kVAr, kVA, PF, harmonics, voltage, current. Single and three-phase.

🔋

UPS Systems

Online/offline UPS, battery level, remaining runtime, bypass status, load percentage. Dual-protocol support via SNMP and Modbus.

🏭

Generator & Genset

Diesel/gas generators. Start/stop events, fuel level, engine hours, phase voltage, load percentage.

💧

Water & Heat Meters

Water meters via M-Bus TCP gateway. Instantaneous flow, cumulative volume, tariff-based consumption tracking.

☀️

Solar Inverters

PV inverter production tracking, DC/AC conversion efficiency, string currents, daily/monthly production trends.

🌡️

Environmental Sensors

Transformer room temperature, humidity, door contact. Automatic alarm email on critical threshold breach.

🌀

VRV/VRF Air Conditioning (BACnet/IP)

VRV/VRF indoor and outdoor units are read over BACnet/IP: run/mode status, room and set temperature, fault codes and gateway communication. Alarms on faults and communication loss.

📡

LoRaWAN Room Sensors

Via a gateway: CO₂/indoor air quality, temperature-humidity, window contacts and room controllers. Low battery, tamper and communication-loss alarms.

🔌

EV Charging Stations (OCPP)

OCPP 1.6-J and 2.0.1 compliant chargers: connector status, charging sessions and energy metering; remote start/stop and current limit.

Connection Requirements

A small software agent is installed on-site. It only needs to be on the same local network as the devices — no complex infrastructure required.

  • A continuously running computer or industrial PC on-site
  • Network connection to devices (wired or wireless)
  • Appropriate converter for serial-line devices
  • Internet access (intermittent connectivity also works fine)

Ready in 4 Steps

1

Device Discovery

6S Teknoloji automatically finds devices on the network using a Modbus scanner.

2

Template Selection

Select brand/model from the ready template library; the register map loads automatically.

3

Test Reading

Accuracy of first readings is verified from the live dashboard.

4

Go Live

Alarm thresholds and tariff parameters are entered; monitoring begins.

See also: energy analyzer monitoring and supported analyzer models.

See 6S Teknoloji at Your Facility

Explore the system with your own data in a demo session.